Putting a WiFi QR code into Word, PowerPoint or Canva
Plenty of people can generate a code and still fail at the last step: drop it into a document, print, and nothing scans. The cause is almost always one of two things — the image was compressed, or its size was computed in screen pixels.
1. Word does not generate QR codes
Word, Excel and PowerPoint have no built-in QR encoder and no way to produce a WIFI:T:WPA;S:…;P:…;; payload. The workflow is always "generate first, lay out second":
- Generate in the browser, export SVG (vector, sharp at any size) or a 300 dpi PNG;
- Or export the finished poster as PDF and skip Office layout entirely;
- Don't screenshot: screen resolution decides the result and scaling always blurs it.
2. Size: pick millimetres, then derive pixels
Print sizing is in millimetres; software often reports pixels. That mismatch is the usual failure point. The table converts at 300 dpi and can be used directly as an export size.
| Code edge | Pixels @300 dpi | Typical use |
|---|---|---|
| 30 mm | ≈ 355 px | Business cards, small table stands |
| 40 mm | ≈ 472 px | A5 table tents, in-room cards |
| 50 mm | ≈ 591 px | Standard A4 poster, scanned within 1 m |
| 80 mm | ≈ 945 px | A3, entrance stands, 1.5–2 m |
| 120 mm | ≈ 1417 px | Banners, windows, 3 m away |
Add the quiet zone: at least four modules of white all round (usually 2–3 mm), never flush against a colour block or an image edge.
3. Three settings in Word
In order
- Disable image compression: File → Options → Advanced → Image size and quality, tick "Do not compress images in file", set default resolution to high fidelity or 300 ppi. Skip this and quality drops on insert.
- Insert, then set exact size: right-click → Size and Position, type centimetres (5 cm × 5 cm) instead of dragging.
- Set wrapping to "in front of text": easier to position on the card and it won't be squeezed by line spacing.
Any PDF preset works for export, but print at actual size — don't let the reader scale for you.
4. Two traps in PowerPoint
- Slide size: the default 16:9 is not A4 portrait. Set Design → Slide size → Custom to 21 × 29.7 cm first, or you export a poster with white borders.
- Compression again: Options → Advanced → Image size and quality must also be set, or a 300 dpi image gets downsized to 150 dpi on export.
5. Canva: usage and pitfalls
- Upload a PNG already sized in pixels for the millimetres you want (50 mm → 591 px). Never upload small and scale up.
- Type millimetres into Position → Size rather than eyeballing alignment.
- Download as "PDF Print" to avoid recompression; "PNG" also works if the export size is large enough.
- No rounded-corner masks, drop shadows or gradient overlays on the code — all three blur module edges.
6. Five checks before printing
| Check | Pass condition |
|---|---|
| Scale | Print dialog at 100% / actual size, "fit to page" off |
| Measured size | Diagonal within 1 mm of the design value |
| Quiet zone | White margin visible on paper, not trimmed |
| Phone test | Scan once on iOS and once on Android, from the real distance |
| Contrast | Dark modules on a light background — never invert |
PNG or SVG, one click apart
Enter the SSID and password, export 300 dpi PNG, SVG or a full-page PDF, sized in millimetres.
Open the WiFi QR studioRelated guides
Frequently asked questions
Can Word generate a WiFi QR code by itself?
Why does the inserted image look blurry?
It looks sharp on screen but won't scan after printing. Why?
Does Canva's PDF Print download improve quality?
Should I turn off 'fit to page' when printing?
Templates that fit this setup
Three layouts picked for this scenario — swap the venue name and password, then export.