What goes in the T field
After T: there are only three legal values. Get one letter wrong and the code still scans — it just never connects, and the error usually says "incorrect password", which sends people down the wrong path.
1. The three legal values
| T value | Meaning | P field |
|---|---|---|
WPA | WPA / WPA2 / WPA3-Personal (including mixed mode) | Required — the pre-shared key |
WEP | Legacy WEP | Required (many devices refuse it) |
nopass | Open network, no password | Must be omitted |
There is no WPA2, WPA3, SAE or 802.1X value. The spec is deliberately coarse: any personal-key network is WPA.
2. WPA3 compatibility
What actually happens
- The code is fine: T is
WPA, P is the password, modern devices join normally. - Devices from around 2018 and older may be WPA2-only and report "unable to join" on a WPA3-only network.
- So: for unknown guests, run WPA2/WPA3 mixed; keep WPA3-only for your own hardware.
3. Open networks: no key at all
Write WIFI:T:nopass;S:MyCafe;;. Adding an empty P:; makes some systems attempt a keyed handshake and fail; adding a real password makes the OS treat it as protected and fail too.
4. Enterprise networks don't fit
802.1X (EAP-TLS, PEAP and so on) needs a username, certificate, EAP method and server validation — none of which exist in the standard payload. At best the code prefills the SSID. For corporate WiFi, a sign saying "ask IT for the connection method" is more honest than a half-working code.
5. Five ways people get it wrong
| Mistake | Result |
|---|---|
Writing WPA2 in T | Unrecognised; may be read as open or ignored |
| Adding P to an open network | Handshake fails; "unable to join" |
Unescaped ; in the password | Field truncated mid-password |
Mixed case (Wpa, NoPass) | Parsers differ; some devices fail outright |
| Declaring WEP on a WPA network | Handshake mismatch; can never connect |
Pick a radio button instead
The studio takes WPA / WEP / open and generates the escaping and field order for you.
Open the WiFi QR studioRelated guides
Frequently asked questions
My network is WPA2 — do I write WPA2 in T?
Will a code work on a WPA3 network?
Why must an open network omit the password field?
Can an enterprise (802.1X) network be encoded?
Is WEP still valid?
Templates that fit this setup
Three layouts picked for this scenario — swap the venue name and password, then export.