WiFi and QR terminology
Making a WiFi poster runs into a wall of abbreviations: SSID, BSSID, WPA2, 2.4 GHz, error correction, quiet zone. This page is ordered by the moment each one appears in the form.
1. Names
| Term | In one sentence | What to watch when filling the form |
|---|---|---|
| SSID | The network name, the line you see in the phone's WiFi list | Case and spaces count; non-Latin names are legal but harder to hand-type elsewhere |
| BSSID | The hardware address of an access point, like a1:b2:c3:d4:e5:f6 | Not part of the QR code; it identifies radios, not guest access |
| Hidden SSID | The router stops broadcasting the name | The payload needs H:true, otherwise phones never probe for it |
| Guest network | A second SSID isolated from the main LAN | Public signs should carry the guest name and password, never the main ones |
2. Security types — only three values exist
| Term | Meaning | Write it as |
|---|---|---|
| WPA / WPA2 / WPA3 | Different handshakes and key derivation; identical for a guest typing a password | WPA |
| WEP | Obsolete; only very old hardware still uses it | WEP |
| Open network | No password at all | nopass, password field empty |
| 802.1X / enterprise | Needs a username, certificate or EAP type | Cannot be expressed; link to an onboarding page instead |
3. Bands: are 2.4 and 5 GHz two networks?
- Same name: one network, the device picks a band — one QR code is enough.
- Different names (e.g.
Home-5G): two SSIDs, and a code can only address one. A guest scanning the 5 GHz code in a weak corner gets "connected but slow".
For venues, publish one name — usually the better-covered band, or a router that uses a shared name for both. Leaving the choice to guests is how complaints start.
4. QR-side terms
| Term | Meaning | Practical note |
|---|---|---|
| Module | The smallest black or white square | All sizing talk is in modules, not pixels |
| Version | Matrix size class, 1–40, denser as it rises | Longer content raises the version; same size gets harder to print |
| Error correction | L/M/Q/H, the share of damage recoverable | Q with a logo, H outdoors or where wear is likely |
| Quiet zone | The blank margin around the symbol, at least four modules | Type or pattern intruding on it is a top cause of failure |
| Finder patterns | The square-in-square blocks in three corners | Never cover them, with a logo or a frame |
5. Things people confuse
- Password vs WPS PIN. The WiFi password is what the code carries; the PIN is a pairing code and has nothing to do with QR.
- Router admin password vs WiFi password. One logs into the admin page, the other joins the network. Never print the first.
- Scanning vs connecting. A scan only reads text; joining is the OS's job. If the payload is wrong, the scan reports nothing at all.
Terms settled — now build one
Fill in the fields above and generate a poster you can print.
Open the WiFi QR studioRelated guides
Frequently asked questions
What is the difference between SSID and BSSID?
An SSID is the network name people see and that goes into the QR code. It can be duplicated and changed freely. A BSSID is the hardware address of a specific access point, used to tell radios apart — it is not part of a WiFi QR code.
Should I pick WPA2 or WPA3 in the form?
Neither: the payload format only has WPA, WEP and nopass. WPA2 and WPA3 both map to WPA, and the phone negotiates whatever the router supports.
Are 2.4 GHz and 5 GHz two separate networks?
Depends on configuration. If the router uses one shared name, it is one network and the device chooses a band. If the names differ, they are two SSIDs and a single QR code can only point at one of them.
What is the quiet zone?
The blank margin around a QR symbol, normally at least four modules wide. It separates the code from the background, frame and text; if type or patterns intrude on it, recognition drops noticeably.
Templates that fit this setup
Three layouts picked for this scenario — swap the venue name and password, then export.