WiFi QR codes for offices and studios
A café has one network for guests. An office does not: staff need the printer and the file server, visitors need internet and nothing else. That means at least two SSIDs, two sets of codes and different places to put them. Here it is as two codes, three placements and one rotation table.
1. Segment the network before designing the card
The QR code is just an entry point; the real structure is segmentation. Two SSIDs on one router is enough — no second box needed:
| Network | Who | Settings |
|---|---|---|
Staff (e.g. OFFICE_STAFF) | Laptops, phones, printer, NAS | Can reach internal devices, can cast, sees shared drives |
Guest (e.g. OFFICE_GUEST) | Clients, interviewees, hot desks | Client isolation, no LAN access, its own bandwidth cap and device limit |
If you also have meeting-room displays or IoT gear (cameras, smart lights), give them a third network of their own rather than mixing them into the guest SSID.
2. Three placements, and the two codes must not swap
| Placement | Which code | Notes |
|---|---|---|
| Reception / waiting area | Guest only | Anything visitor-visible carries guest only; 2 in (5 cm) code with "Guest WiFi — scan to join" |
| Meeting-room tent card | Mostly guest | Where "what's the WiFi?" gets asked; 1.2 in (3 cm) code, printed on both sides so it reads from either end of the table |
| Back of desk card / by the printer | Staff | Facing inward or downward so visitors do not photograph it; 1.2 in (3 cm) is plenty |
The classic mistake is pinning the staff code in the meeting room or at reception. Within two weeks a visitor has photographed it and the password is effectively public. The test is simple: will this card ever be seen by someone not on payroll?
3. Size: offices need less than venues
Office scanning distances are short — 12–20 in (30–50 cm) from hand to desk card, maybe 24–32 in (60–80 cm) across a meeting table — so 1.2 in (3 cm) is enough. Only wall or glass-door codes need 2 in (5 cm). Same rule: edge ≈ distance ÷ 10, or use the size calculator.
Two office-specific traps: acrylic stands and glass decals at reception catch ceiling lights and kill the scan — go matte or move the card; and meeting-room cards get buried under laptops and cables, so a small stand beats a flat A4 sheet.
4. Password changes and departures: a table beats a clever password
| Trigger | Guest | Staff |
|---|---|---|
| Someone leaves | No change | Change same day; revoke NAS, printer and shared-drive access |
| Leeching detected | Change now, check the client count | As needed — read router logs for the source first |
| Scheduled (quarterly) | Change | Change |
| New router or ISP | Keep the same SSID and password and the cards still work | Same — but new hardware usually ships with a different default SSID |
When you do change it with many cards in the field, keep the stand and swap the insert: print only a business-card-sized patch each time and the cost drops to a tenth.
Three things the guest network should do anyway
- Rate limit: a bandwidth cap on the guest SSID stops one large upload from saturating the line.
- Time limit: some routers can expire guest access outside business hours.
- Device cap: 10–20 clients, which beats investigating "why is everything slow" later.
5. The payload itself: never hand-assemble it
A WiFi QR code is one line of text shaped like WIFI:T:WPA;S:SSID;P:password;;. Semicolons, quotes and backslashes in the password must be escaped, and a non-ASCII or space-containing SSID breaks the whole string if encoding is even slightly off. Generate it in the studio instead of typing it, then scan the result on both iOS and Android.
One reminder: the password is stored in plain text inside the code. Anyone who scans it — including with a generic scanner app that just shows the decoded string — has it. That makes it right for a network you are happy for anyone in the room to use, and wrong as an access-control mechanism.
6. Pre-launch checklist
Run through this before the cards go up
- Reception and meeting rooms show guest codes only; staff codes face inward or downward.
- Guest SSID has client isolation on, with no route to printer, NAS or cameras.
- Both codes scanned on iOS and Android, doing it while disconnected from the network.
- Code edges ≥ 1.2 in (3 cm) on desk cards, ≥ 2 in (5 cm) on reception wall cards, quiet zone intact.
- The rotation table says who changes which code and when — not just in one person's head.
Generate the staff code and the guest code in one sitting
Change SSID and password, export straight to 300 dpi PDF or SVG at tent-card, business-card or A5 size.
Open the WiFi QR code studioRelated reading
Frequently asked questions
Do we need a QR code for the staff network at all?
Do two networks mean two routers?
Should the password change when someone leaves?
What guest settings actually matter?
Templates that fit this setup
Three layouts picked for this scenario — swap the venue name and password, then export.