WiFi QR codes for restaurants and cafés
A venue code has a harder job than one you send a friend: it has to survive oil, water, being flipped over hundreds of times a day, and it must read instantly for a guest who is already impatient. This covers the four decisions that matter — where it goes, how big it prints, what it says, and what happens when the password changes.
1. Three placements solve three different problems
One poster on the wall means everyone crowds the doorway scanning it. Each spot owns a slice of the experience:
| Placement | Moment | What works |
|---|---|---|
| Table tent | Seated, waiting for food, wants WiFi now | One per table, 1.2 in (3 cm) code, stand 4–5 in (10–12 cm) tall so it doesn't block the view |
| Counter / pickup point | Ordering, paying, waiting for the order | Card facing the guest, 1.2–1.6 in (3–4 cm) code, plus "scan to join" |
| Window / entrance | Passing by, checking whether there's WiFi | Vinyl decal, 3–4 in (8–10 cm) code, at eye level 4.5–5.5 ft |
Table tents carry the most weight; the other two are supplements. A window decal alone means seated guests walk back to the door, and table tents alone are invisible from the street.
2. Print size follows distance, not paper size
The rule is blunt: edge ≈ scanning distance ÷ 10, never below 0.8 in (2 cm), ideally at least 1.2 in (3 cm).
| Distance | Code edge | Typical use |
|---|---|---|
| 12–20 in (30–50 cm) | 1.2 in (3 cm) | Table tents, counter cards |
| 2.5–5 ft (80 cm–1.5 m) | 2 in (5 cm) | Wall poster, corner of a menu |
| 5–8 ft (1.5–2.5 m) | 2.4–3 in (6–8 cm) | Pickup area, restroom door |
| 10 ft+ (3 m+) | 3–4 in (8–10 cm) | Window decal, entrance sign |
If you would rather not estimate, use the size calculator — distance in, minimum and recommended edge out, plus the 300 dpi pixel count. For a trimmed item like a tent card, remember the quiet zone: a 4-module margin all round. A guillotine cut that eats into it kills the code.
3. Four copy templates you can copy outright
| Style | Headline | Subline |
|---|---|---|
| Minimal | Scan to join WiFi | Network name · password |
| Guiding | Scan and you're connected | Network: SHOP_Guest — password in small print below |
| Service-led | Join WiFi, then order from your phone | Ordering code separate — this one is WiFi only |
| Bilingual | 扫描即连 / Scan to join | Free WiFi · no password needed |
Three details people miss: the headline should be at least 14 pt because guests read it at an angle across the table; write the SSID exactly, case and underscores included; and keep the ordering QR and the WiFi QR on separate cards. Side by side, guests scan the wrong one and conclude the code is broken.
Print the password or not
Print it, in small type. Someone will always fail to scan — an old phone, a screen protector, a messaging app's camera that does not handle WiFi payloads. Typing is the fallback. The cost is that the password is visible to everyone in the room, so do not reuse it on the POS or back-office network.
4. Materials: venue-proof beats pretty
- Acrylic stand: water- and oil-proof, wipeable, costs more, good for full-service dining. It reflects though — go matte, or put the code on a frosted panel.
- Card stock with matte lamination: cheap in volume, dies the moment soup lands on it. Fine for a two-week promotion, not for year-round use.
- Holder with swappable insert: stand stays, card changes with the password. Above a dozen tables this is the only option that does not hurt.
- Table centre or corner: centre gets buried under plates and hands; corner or a small stand holds up better.
5. After a password change: pick one of two paths
A venue changes its WiFi password once or twice a year, usually after someone leeches or an employee leaves. Two sensible options:
- Reprint the batch: under ~15 tables this is the simplest, and cheaper than running two live passwords and answering questions about which is right.
- Swap only the insert: if the stands are acrylic, print just the code block at business-card size and replace it. A password change then costs a few dozen cards.
The thing not to do: scribble the new password next to the old code by hand. Handwriting is hard to read, gets wiped off, and makes the whole card look untrustworthy.
6. Four failures specific to venues
| Symptom | Actual cause |
|---|---|
| "I scanned it and nothing happened" | Code sits behind glass or glossy acrylic with a ceiling light reflecting into it. Move it, or go matte |
| Two or three guests in ten cannot connect | Guest network hit its client limit (consumer routers often cap at 10–16 devices). Add a second guest SSID or move to a business AP |
| Phone shows garbled text instead of joining | The payload was hand-assembled and a semicolon or quote was left unescaped. Generate it, do not type WIFI: by hand |
| Password wrong on a freshly printed batch | Test-scan the export on a real phone before ordering. This one step prevents a whole reprint |
Export at tent-card size
Built-in paper sizes for table tent cards, business cards and A5, adjustable code size, 300 dpi PDF ready for the printer.
Open the WiFi QR code studioRelated reading
Frequently asked questions
How big should the QR code on a table tent be?
Should the password be printed next to the code?
Guests scan but still cannot connect — code or router?
Do all cards need reprinting after a password change?
Templates that fit this setup
Three layouts picked for this scenario — swap the venue name and password, then export.