WiFi and QR terminology

Making a WiFi poster runs into a wall of abbreviations: SSID, BSSID, WPA2, 2.4 GHz, error correction, quiet zone. This page is ordered by the moment each one appears in the form.

1. Names

TermIn one sentenceWhat to watch when filling the form
SSIDThe network name, the line you see in the phone's WiFi listCase and spaces count; non-Latin names are legal but harder to hand-type elsewhere
BSSIDThe hardware address of an access point, like a1:b2:c3:d4:e5:f6Not part of the QR code; it identifies radios, not guest access
Hidden SSIDThe router stops broadcasting the nameThe payload needs H:true, otherwise phones never probe for it
Guest networkA second SSID isolated from the main LANPublic signs should carry the guest name and password, never the main ones

2. Security types — only three values exist

TermMeaningWrite it as
WPA / WPA2 / WPA3Different handshakes and key derivation; identical for a guest typing a passwordWPA
WEPObsolete; only very old hardware still uses itWEP
Open networkNo password at allnopass, password field empty
802.1X / enterpriseNeeds a username, certificate or EAP typeCannot be expressed; link to an onboarding page instead

3. Bands: are 2.4 and 5 GHz two networks?

For venues, publish one name — usually the better-covered band, or a router that uses a shared name for both. Leaving the choice to guests is how complaints start.

4. QR-side terms

TermMeaningPractical note
ModuleThe smallest black or white squareAll sizing talk is in modules, not pixels
VersionMatrix size class, 1–40, denser as it risesLonger content raises the version; same size gets harder to print
Error correctionL/M/Q/H, the share of damage recoverableQ with a logo, H outdoors or where wear is likely
Quiet zoneThe blank margin around the symbol, at least four modulesType or pattern intruding on it is a top cause of failure
Finder patternsThe square-in-square blocks in three cornersNever cover them, with a logo or a frame

5. Things people confuse

  1. Password vs WPS PIN. The WiFi password is what the code carries; the PIN is a pairing code and has nothing to do with QR.
  2. Router admin password vs WiFi password. One logs into the admin page, the other joins the network. Never print the first.
  3. Scanning vs connecting. A scan only reads text; joining is the OS's job. If the payload is wrong, the scan reports nothing at all.

Terms settled — now build one

Fill in the fields above and generate a poster you can print.

Open the WiFi QR studio

Related guides

Frequently asked questions

What is the difference between SSID and BSSID?
An SSID is the network name people see and that goes into the QR code. It can be duplicated and changed freely. A BSSID is the hardware address of a specific access point, used to tell radios apart — it is not part of a WiFi QR code.
Should I pick WPA2 or WPA3 in the form?
Neither: the payload format only has WPA, WEP and nopass. WPA2 and WPA3 both map to WPA, and the phone negotiates whatever the router supports.
Are 2.4 GHz and 5 GHz two separate networks?
Depends on configuration. If the router uses one shared name, it is one network and the device chooses a band. If the names differ, they are two SSIDs and a single QR code can only point at one of them.
What is the quiet zone?
The blank margin around a QR symbol, normally at least four modules wide. It separates the code from the background, frame and text; if type or patterns intrude on it, recognition drops noticeably.

Templates that fit this setup

Three layouts picked for this scenario — swap the venue name and password, then export.