WiFi QR codes on a TV, tablet or big screen
A printed code usually fails for one reason: it is too small. A screen code fails for several at once — dim backlight, stretched aspect ratio, warm colour temperature, eye-care modes, video compression. Fix them in this order: brightness, ratio, resolution.
1. The fundamental difference from print
Paper black is reflected light; a screen's white emits its own. Two consequences follow:
- Contrast is a setting, not a material. A printed code's contrast is fixed at the printer. A screen code's contrast changes the moment someone touches brightness, contrast, eye-care or dark mode.
- Resolution gets resampled. Module edges are hard on paper; on screen they grow grey halos and ringing whenever the image is scaled, encoded or passed through a casting protocol — exactly where cameras misread.
2. Four settings that decide success
| Setting | Pass mark | How to set it |
|---|---|---|
| Brightness | 70% or higher, ideally 100% | Crank it up and turn off auto-brightness, which dims the panel to suit the room |
| Contrast / mode | Standard picture mode | Avoid cinema and eye-care; disable warm colour and blue-light filters |
| Aspect ratio | Native 1:1, never stretched | Do not "fill the screen"; centre a square image and leave the sides black |
| Resolution | Edge ≥ one third of screen height | At least 360 px on a 1080p display; use PNG or SVG, not JPEG |
3. How big: still distance ÷ 10
The rule is identical to print — edge ≈ scanning distance ÷ 10 — except the edge now has to be converted into pixels.
| Carrier | Viewing distance | Code edge | On a 1080p panel |
|---|---|---|---|
| Ordering tablet / kiosk | 12–20 in (30–50 cm) | 2 in (5 cm) | ≈ 90 px |
| Meeting-room projection | 5–6.5 ft (1.5–2 m) | 6–8 in (15–20 cm) | ≈ 220–290 px |
| Lobby TV | 6.5–10 ft (2–3 m) | 8–12 in (20–30 cm) | ≈ 290–350 px |
| Window / entrance display | 10 ft+ | 12 in+ (30 cm+) | ≥ 350 px, bigger is better |
The table is a starting point; what actually matters on a screen is the share of the frame. Once autofocus settles, the camera hunts for the largest square feature in view — below roughly a quarter of the frame, recognition slows sharply. So a lobby TV should show one big code and two lines of text, not five photos and a promotion.
When in doubt, reverse the number from distance with the size calculator and convert to pixels for your panel.
4. Four common carriers, done right
| Carrier | What works | Watch out for |
|---|---|---|
| Tablet as a stand | Full-screen PNG, screen lock off, on mains power | True Tone / ambient colour shifts the white background yellow under warm lighting |
| TV or digital signage | 1:1 PNG on a USB stick, player set to original ratio, no transition effects | TV power-saving dims the panel after a few seconds — disable it |
| Laptop projection | One centred 1:1 image on a slide, never full-bleed | Casting compresses the frame; test-scan the projected image itself, not the source file |
| Kiosk / self-order screen | Code fills a third of the screen plus one instruction line, no animation | Glass fronts reflect; keep brightness a notch above ambient |
5. Five failures unique to screens
| Symptom | Cause and fix |
|---|---|
| iPhone fails, Android works | Usually inverted colours (light modules on dark) or a warm cast. Go back to dark-on-light and turn off eye-care |
| Works by day, fails at night | Auto-brightness dimmed the panel. Disable it or switch to an always-on profile |
| Broke after a TV swap | New TV defaults to 16:9 stretch plus noise reduction, which widens the square and blurs edges. Set original ratio, disable noise reduction |
| Fails after sending it in chat | The app recompressed the screenshot and smeared the modules. Send the file, or display it on site — do not forward screenshots |
| Unstable on a scratched or dirty panel | Dirt over module edges is local occlusion. Clean the glass, or print the code one step larger |
One line to remember
Screen codes need four things: big, square, bright, still. Fill as much of the frame as reasonable, keep it 1:1, run brightness at maximum with eye-care off, and add no animation or background. Do all four and recognition matches a printed code.
Export something a screen likes
SVG scales without loss, PNG takes an exact pixel size, pure black and white, clean quiet zone.
Open the WiFi QR code studioRelated reading
Frequently asked questions
Why can't phones scan the code on our TV?
How large should the code be on screen?
Can the code be animated or sit on a video background?
Does screenshotting and re-sharing blur it?
Templates that fit this setup
Three layouts picked for this scenario — swap the venue name and password, then export.