WiFi QR codes on a TV, tablet or big screen

A printed code usually fails for one reason: it is too small. A screen code fails for several at once — dim backlight, stretched aspect ratio, warm colour temperature, eye-care modes, video compression. Fix them in this order: brightness, ratio, resolution.

1. The fundamental difference from print

Paper black is reflected light; a screen's white emits its own. Two consequences follow:

2. Four settings that decide success

SettingPass markHow to set it
Brightness70% or higher, ideally 100%Crank it up and turn off auto-brightness, which dims the panel to suit the room
Contrast / modeStandard picture modeAvoid cinema and eye-care; disable warm colour and blue-light filters
Aspect ratioNative 1:1, never stretchedDo not "fill the screen"; centre a square image and leave the sides black
ResolutionEdge ≥ one third of screen heightAt least 360 px on a 1080p display; use PNG or SVG, not JPEG

3. How big: still distance ÷ 10

The rule is identical to print — edge ≈ scanning distance ÷ 10 — except the edge now has to be converted into pixels.

CarrierViewing distanceCode edgeOn a 1080p panel
Ordering tablet / kiosk12–20 in (30–50 cm)2 in (5 cm)≈ 90 px
Meeting-room projection5–6.5 ft (1.5–2 m)6–8 in (15–20 cm)≈ 220–290 px
Lobby TV6.5–10 ft (2–3 m)8–12 in (20–30 cm)≈ 290–350 px
Window / entrance display10 ft+12 in+ (30 cm+)≥ 350 px, bigger is better

The table is a starting point; what actually matters on a screen is the share of the frame. Once autofocus settles, the camera hunts for the largest square feature in view — below roughly a quarter of the frame, recognition slows sharply. So a lobby TV should show one big code and two lines of text, not five photos and a promotion.

When in doubt, reverse the number from distance with the size calculator and convert to pixels for your panel.

4. Four common carriers, done right

CarrierWhat worksWatch out for
Tablet as a standFull-screen PNG, screen lock off, on mains powerTrue Tone / ambient colour shifts the white background yellow under warm lighting
TV or digital signage1:1 PNG on a USB stick, player set to original ratio, no transition effectsTV power-saving dims the panel after a few seconds — disable it
Laptop projectionOne centred 1:1 image on a slide, never full-bleedCasting compresses the frame; test-scan the projected image itself, not the source file
Kiosk / self-order screenCode fills a third of the screen plus one instruction line, no animationGlass fronts reflect; keep brightness a notch above ambient

5. Five failures unique to screens

SymptomCause and fix
iPhone fails, Android worksUsually inverted colours (light modules on dark) or a warm cast. Go back to dark-on-light and turn off eye-care
Works by day, fails at nightAuto-brightness dimmed the panel. Disable it or switch to an always-on profile
Broke after a TV swapNew TV defaults to 16:9 stretch plus noise reduction, which widens the square and blurs edges. Set original ratio, disable noise reduction
Fails after sending it in chatThe app recompressed the screenshot and smeared the modules. Send the file, or display it on site — do not forward screenshots
Unstable on a scratched or dirty panelDirt over module edges is local occlusion. Clean the glass, or print the code one step larger

One line to remember

Screen codes need four things: big, square, bright, still. Fill as much of the frame as reasonable, keep it 1:1, run brightness at maximum with eye-care off, and add no animation or background. Do all four and recognition matches a printed code.

Export something a screen likes

SVG scales without loss, PNG takes an exact pixel size, pure black and white, clean quiet zone.

Open the WiFi QR code studio

Related reading

Frequently asked questions

Why can't phones scan the code on our TV?
Three usual causes: brightness or contrast turned down so blacks render grey, the image stretched off its 1:1 ratio so module edges blur, and a warm picture mode (eye care or cinema) making the white background look yellow. Set the TV to standard mode, brightness up, and original aspect ratio.
How large should the code be on screen?
Same rule as print — edge ≈ distance ÷ 10. A tablet read at 20 in needs 2 in; a lobby TV read at 5–6 ft needs 8–12 in; a screen viewed from 10 ft needs at least 12 in. On a 1080p panel, 2 in of screen diagonally corresponds to roughly 90 px, and 12 in to about 350 px.
Can the code be animated or sit on a video background?
Better not. Moving backgrounds, gradients and rotating effects raise the recognition difficulty, especially on older phones or in dim rooms. The steadier, more purely black-and-white and more isolated the code is, the more reliable it scans.
Does screenshotting and re-sharing blur it?
Yes. Upscaling or JPEG compression destroys module edges and leaves grey halos; if the error-correction level is low the code simply stops working. Display SVG or a high-resolution PNG, and avoid passing it through chat apps that recompress.

Templates that fit this setup

Three layouts picked for this scenario — swap the venue name and password, then export.