Changed the WiFi password — what happens to the printed codes?
A WiFi code is not a link: the password sits inside the payload. Change it and every printed sign is dead on arrival — still scannable, no longer usable. There is no remote update; only a choice of how to replace them.
1. What guests actually see
The phone reads WIFI:T:WPA;S:network;P:oldpassword;; and tries to join. The router rejects the key, and the guest gets "incorrect password" or a silent loop of retries — with nothing telling them to ask staff. That's why the sign must change at the same time.
2. Three options, different costs
| Option | Cost | When it fits |
|---|---|---|
| Reprint everything, pull old signs | Printing plus labour, the most thorough | The sign also prints the password in text, or the design is changing anyway |
| Sticker over the code area only | The price of one sticker | Design stays the same, only the code changes (most common) |
| Run old and new networks side by side | One extra guest SSID on the router | High traffic, cannot afford "won't connect" at all |
Most venues should take the second: layout, logo and wording stay, only the code block is replaced.
3. Re-stickering without breaking it
Five details
- Cover the whole code, not just the middle. The old finder patterns must be fully hidden, or two patterns overlap and scanners resolve the wrong one.
- Same size as the old code. Don't shrink it because the sticker is easier to cut; below 80% of the original, the scanning distance collapses.
- Match the card's background colour. White on white; choose matte stock, since gloss reflects under downlights.
- Keep the quiet zone. At least 3 mm of white between the new code and the sticker edge.
- Test-scan on site, from the real viewing distance — not standing at the table.
Never: pen edits over the old code, correction tape across part of it, or an A4 print cut in half and taped on. Those three cause most "the printer must be broken" calls.
4. If you need a transition period
- Keep the old guest network alive for 2–4 weeks, renamed "BrandGuest-old", and say so on the new sign.
- Show both signs during the transition — new above, old below, clearly different sizes so they aren't framed together.
- Close the old network when the period ends and pull its signs. Leaving it running is a permanent back door.
5. Timing
Do it after closing or before opening, never mid-service. Mid-service means guests drop off mid-session, and if the new signs aren't up yet the front desk spends the next hour explaining.
6. Avoiding the same rework next time
| Practice | Why it helps |
|---|---|
| Keep the design file, not only the PNG | Next change rebuilds only the code; layout and copy stay |
| Print "password updated 2026-11" small in the corner | Anyone can tell at a glance whether the sign is current |
| Print 10–20% spares on the first run | Swap without waiting for a print shop |
| Record SSID and password in one internal sheet | Multiple staff can't end up with two different passwords |
Make the new code first
Enter the new password, export PNG, SVG or PDF sized in millimetres — good for both stickers and reprints.
Open the WiFi QR studioRelated guides
Frequently asked questions
I only changed the password, not the network name. Does the old code still scan?
Can I just cover part of the old code with paper?
Is writing the new password next to the sign enough?
When should the password be changed?
How do I avoid doing this again next year?
Templates that fit this setup
Three layouts picked for this scenario — swap the venue name and password, then export.