WiFi QR codes for restaurants and cafés

A venue code has a harder job than one you send a friend: it has to survive oil, water, being flipped over hundreds of times a day, and it must read instantly for a guest who is already impatient. This covers the four decisions that matter — where it goes, how big it prints, what it says, and what happens when the password changes.

1. Three placements solve three different problems

One poster on the wall means everyone crowds the doorway scanning it. Each spot owns a slice of the experience:

PlacementMomentWhat works
Table tentSeated, waiting for food, wants WiFi nowOne per table, 1.2 in (3 cm) code, stand 4–5 in (10–12 cm) tall so it doesn't block the view
Counter / pickup pointOrdering, paying, waiting for the orderCard facing the guest, 1.2–1.6 in (3–4 cm) code, plus "scan to join"
Window / entrancePassing by, checking whether there's WiFiVinyl decal, 3–4 in (8–10 cm) code, at eye level 4.5–5.5 ft

Table tents carry the most weight; the other two are supplements. A window decal alone means seated guests walk back to the door, and table tents alone are invisible from the street.

2. Print size follows distance, not paper size

The rule is blunt: edge ≈ scanning distance ÷ 10, never below 0.8 in (2 cm), ideally at least 1.2 in (3 cm).

DistanceCode edgeTypical use
12–20 in (30–50 cm)1.2 in (3 cm)Table tents, counter cards
2.5–5 ft (80 cm–1.5 m)2 in (5 cm)Wall poster, corner of a menu
5–8 ft (1.5–2.5 m)2.4–3 in (6–8 cm)Pickup area, restroom door
10 ft+ (3 m+)3–4 in (8–10 cm)Window decal, entrance sign

If you would rather not estimate, use the size calculator — distance in, minimum and recommended edge out, plus the 300 dpi pixel count. For a trimmed item like a tent card, remember the quiet zone: a 4-module margin all round. A guillotine cut that eats into it kills the code.

3. Four copy templates you can copy outright

StyleHeadlineSubline
MinimalScan to join WiFiNetwork name · password
GuidingScan and you're connectedNetwork: SHOP_Guest — password in small print below
Service-ledJoin WiFi, then order from your phoneOrdering code separate — this one is WiFi only
Bilingual扫描即连 / Scan to joinFree WiFi · no password needed

Three details people miss: the headline should be at least 14 pt because guests read it at an angle across the table; write the SSID exactly, case and underscores included; and keep the ordering QR and the WiFi QR on separate cards. Side by side, guests scan the wrong one and conclude the code is broken.

Print the password or not

Print it, in small type. Someone will always fail to scan — an old phone, a screen protector, a messaging app's camera that does not handle WiFi payloads. Typing is the fallback. The cost is that the password is visible to everyone in the room, so do not reuse it on the POS or back-office network.

4. Materials: venue-proof beats pretty

5. After a password change: pick one of two paths

A venue changes its WiFi password once or twice a year, usually after someone leeches or an employee leaves. Two sensible options:

  1. Reprint the batch: under ~15 tables this is the simplest, and cheaper than running two live passwords and answering questions about which is right.
  2. Swap only the insert: if the stands are acrylic, print just the code block at business-card size and replace it. A password change then costs a few dozen cards.

The thing not to do: scribble the new password next to the old code by hand. Handwriting is hard to read, gets wiped off, and makes the whole card look untrustworthy.

6. Four failures specific to venues

SymptomActual cause
"I scanned it and nothing happened"Code sits behind glass or glossy acrylic with a ceiling light reflecting into it. Move it, or go matte
Two or three guests in ten cannot connectGuest network hit its client limit (consumer routers often cap at 10–16 devices). Add a second guest SSID or move to a business AP
Phone shows garbled text instead of joiningThe payload was hand-assembled and a semicolon or quote was left unescaped. Generate it, do not type WIFI: by hand
Password wrong on a freshly printed batchTest-scan the export on a real phone before ordering. This one step prevents a whole reprint

Export at tent-card size

Built-in paper sizes for table tent cards, business cards and A5, adjustable code size, 300 dpi PDF ready for the printer.

Open the WiFi QR code studio

Related reading

Frequently asked questions

How big should the QR code on a table tent be?
Size it from the scanning distance, not the card. A tent card sits 12–20 inches (30–50 cm) away, so a 1.2 inch (3 cm) code is enough. Wall posters at 3–5 feet need 2 inches (5 cm), and window decals read from 10 feet need 3–4 inches (8–10 cm). A rough rule is distance divided by 10, never under 0.8 inch (2 cm).
Should the password be printed next to the code?
Yes, in smaller type. Some guests cannot scan — older phones, screen protectors, or store apps without a scanner — and typing is their fallback. The trade-off is that everyone in the room sees the password, so keep the guest SSID separate from the POS or back-office network.
Guests scan but still cannot connect — code or router?
Test the same card with a second phone. If both fail it is the router side: guest network disabled, client limit reached, or MAC filtering. If only one device fails it is that device, and manual password entry confirms it.
Do all cards need reprinting after a password change?
Under about 15 tables, reprint the lot — cheaper than maintaining two passwords. Above that, use a holder with a swappable insert so only the small code card is replaced each time.

Templates that fit this setup

Three layouts picked for this scenario — swap the venue name and password, then export.