A WiFi card that rental guests actually use

"What's the WiFi password?" is the single most repeated message in short-term hosting. One card, in the right place at the right size, removes most of it — provided the four lines on it are the right four lines.

Rentals differ from cafés: there is no counter to ask at, guests arrive late, may not share your language, and the room turns over. So the card has two jobs at once — scan-to-connect, and readable reference when the scan fails. A bare QR code does only the first.

1. The four lines every card needs

Top to bottom

  1. Network name, copied character for character from the router, case and spaces included.
  2. Password in a monospaced face at least 1.3× body size, avoiding lookalikes such as l / 1 and O / 0.
  3. The QR code, 5 cm and up, with its quiet zone kept clear of text.
  4. One instruction line — "Scan to join; if it fails, type the password above" — plus where the router is or how to reboot it.

If the property broadcasts more than one network (say a main router and a bedroom extender), put the main network first and label the second one "use this if the signal is weak". Making a guest choose between two similar-looking names is a reliable source of complaints and support messages.

2. Size and placement follow the guest's movement

PlacementWhat the guest is doingSuggestion
Bedside table tentSitting down with the phoneA6 portrait, 5 cm code, acrylic holder
Entryway, behind the doorJust arrived, still standingA5 hanging card, 7 cm code, around 1.4 m height
Living room wallWalking pastA4, 10 cm code
Sticker on the routerFallback when the card is lostWaterproof 4 cm decal

Three copies cost very little and work better than one: guests move differently — some drop bags first, some hunt for a power outlet. Do not rely on the fridge alone; in many rentals the fridge is nowhere near the living room.

3. Wording that pre-answers the follow-up messages

Add "If the internet is down, message me through the platform" — routing outages into a channel that leaves a record is far easier to manage than discovering them in a review.

4. International guests: bilingual, but the name stays literal

  1. Keep the SSID as broadcast; put a translation of its purpose beside it, never a translation of the name itself.
  2. Set the password in a monospaced font and repeat it once at larger size for hand typing.
  3. Make the card bilingual in two columns, and include an English version plus the QR image in the check-in message.
  4. Avoid full-width punctuation or accented characters in the SSID or password — they are easy to mistype on another keyboard.

5. Changing the password shouldn't mean reprinting the sign

In a rental the change points are scattered: a long stay ends, the router is replaced, someone has been piggybacking. Design the card as a fixed board with a replaceable insert:

If a slot is too much work, an acrylic holder plus a small printed card achieves nearly the same thing at a fraction of the cost of reprinting an A4 sign.

6. Pre-handover check

  • Scan with both an iPhone and an Android phone; confirm the join prompt appears directly.
  • Try scanning with mobile data off, so nothing depends on a lookup service.
  • Dim the screen to roughly 30% and scan again — that is the late-arrival condition.
  • Compare the printed text with the decoded result, especially capitalisation.
  • Keep the card at least half a metre from sockets, metal panels and the microwave.

Make a card you can print today

Enter the SSID and password, pick a tent-card or A6 layout, and export a PDF for the print shop or your home printer.

Open the WiFi QR studio

Related guides

If a guest reports "it connected but there's no internet", confirm with a browser first, then work through the order in the troubleshooting guide.

Frequently asked questions

Should rental WiFi details be a printed card or a message?
Both. Put the QR image in the check-in message, and keep a physical card in the room as the fallback for guests who never opened the message, changed phones, or only think about connecting after arriving. The printed code should be at least 5 cm.
Should the password change for every guest?
Rotating per stay is usually not worth it: guests arriving late cannot read a message that has scrolled away, and owners end up handling support calls. A better balance is a separate guest SSID with client isolation, a password that holds for the season, and a replaceable card insert so a change costs one small reprint.
What if guests speak a different language?
Make the card bilingual and keep the SSID exactly as broadcast, with a translated explanation beside it rather than translating the name itself. Never use full-width punctuation or characters that are hard to type on a phone keyboard.
The card gets greasy and stops scanning. What helps?
Print the code behind an acrylic frame or a matte laminate sheet, and clean the surface with a dry microfibre cloth. Coastal and humid properties should also avoid paper stock that absorbs moisture.
Can several units share one network?
Yes, but say so on the card. For separate units in the same building, give each its own SSID suffix so a guest does not accidentally join a neighbour's network and wonder why the speed is poor.

Templates that fit this setup

Three layouts picked for this scenario — swap the venue name and password, then export.